These are the informational faults for a Sensor device. These messages are only for your information and there is no specific action to be taken.
Fault | Severity | Description/Cause |
|---|---|---|
FIPS Violation Detected - User Login | Informational | The device reports a user login to its CLI after device initialization. This is a FIPS 140-2 Level 3 violation. |
Device Reset for FIPS Mode Change | Informational | {0} |
Cluster Software Initialization Status | Informational | {0} device software has been initialized correctly. |
Pluggable Interface Absent {0} | Informational | Pluggable interface in {0} is {1}. |
Device Download Started | Informational | A download has been initiated from the device CLI. |
FIPS Mode Change | Informational | An upgrade or downgrade between FIPS and non-FIPS software images has been detected. This resets the device configuration and restores the default login password. |
Load Balancer Power Up | Informational | Load Balancer "{0}" has completed booting and is online. |
Packet Capture File Transfer Status | Informational | The device has started sending the packet capture file via SCP. The device has completed sending the packet capture file via SCP. The device has stopped capturing packets because it has reached the configured maximum capture file size. The device has stopped capturing packets because it has reached the configured maximum duration. The device is ready to transfer the packet capture file to the Manager. |
Hitless Reboot Status | Informational | The device successfully completed a hitless reboot. |
Device Auto-Recovery Status | Informational | The device successfully completed auto-recovery. |
Device Download Complete | Informational | Device download initiated from the device CLI has completed with status {2}. Download type={4}, Time={3}, Filename={5} |
Sensor Health Changed | Informational | Health of sensor {0} changed from {1} to {2}. This fault is raised in the event of Sensor's Overall Health status change. |