The front panel LEDs provide status information for the health of the Sensor and the activity on its ports.
Front panel LEDs
LED | Status | Description |
|---|---|---|
Temp | Green Amber | Inlet air temperature measured inside the chassis is normal. (Chassis temperature OK) Inlet air temperature measured inside the chassis is too high. (Chassis temperature too hot) |
Fan | Green Amber | All the fans are operating. One or more fans are not working. |
Status | Green Amber | It indicates that Sensor is in good health. System is booting up or something is not in good health status. |
Management Port Speed | Green Amber Off | The port speed is 1000 Mbps. The port speed is 100 Mbps. The port speed is 10 Mbps. |
Management Port Link | Green Off | The link is up. The link is down. |
Response Port Speed | Green Amber Off | The port speed is 1000 Mbps. The port speed is 100 Mbps. The port speed is 10 Mbps. |
Response Port Link | Green Off | The link is up. The link is down. |
Normal/Bypass | Green Off | The port pair is in Inline Fail-Open/Inline Fail-Close/SPAN/Tap Mode. The Port Pair is in the Bypass Mode. |
Ethernet Ports Link | Green Off | The link is up. The link is down. |
Ethernet Ports Speed | Green Amber Off | The port speed is 1000 Mbps. The port speed is 100 Mbps. The port speed is 10 Mbps. |
Note
There are no rear panel LEDs on the NS3x00 Sensors.