This command manually enables or disables flow control on the specified gigabit ethernet monitoring port.
Syntax:set intfport id <port> flowcontrol <on | off>
| Parameter | Description |
|---|---|
| <port> | A valid gigabit ethernet monitoring port on the Sensor
Valid port numbers for NS-series are: G0/1 | G0/2 | G1/1 | G1/2 | G1/3 | G1/4 | G1/5 | G1/6 | G1/7 | G1/8 | G1/9 | G1/10 | G1/11 | G1/12 | G2/1 | G2/2 | G2/3 | G2/4 | G2/5 | G2/6 | G2/7 | G2/8 | G2/9 | G2/10 | G2/11 | G2/12 | G3/1 | G3/2 | G3/3 | G3/4 | G3/5 | G3/6 | G3/7 | G3/8 |
| <on> | Enables the flow control on the gigabit ethernet monitoring port |
| <off> | Disables the flow control on the gigabit ethernet monitoring port |
set intfport id 1A flowcontrol on
Applicable to:NS-series Sensors