show mem-usage

This command displays the system memory usage details of the device.

This command has no parameters.

Syntax:

show mem-usage

The show mem-usage command also gives the average percentage usage (Avg.) and the maximum percentage usage (Max.) of these entities on all the processing elements.

The L7Dcap counter descriptions are as follows:

Avg. Used L7 Dcap flows across all PEs — Average percentage of L7Dcap flows used from the value configured in the Manager across all the Processing Engines in the Sensor
Max. Used L7 Dcap flows on a single PE — Percentage of L7Dcap flows used from the maximum value that a single Processing Engine manages

Sample Output:

For Sensors, the output is as shown below:
Avg. Used TCP and UDP Flows across all PEs : 0%
Max. Used TCP and UDP Flows on a single PE : 0%
Avg. Used Fragmented IP Flows across all PEs : 0%
Max. Used Fragmented IP Flows on a single PE : 0%
Avg. Used ICMP Flows across all PEs : 0%
Max. Used ICMP Flows on a single PE : 0%
Avg. Used SSL Flows across all PEs : 0%
Max. Used SSL Flows on a single PE : 0%
Avg. Used Fragment Reassembly Buffers across all PEs : 0%
Max. Used Fragment Reassembly Buffers on a single PE : 0%
Avg. Used Packet Buffers across all PEs : 0%
Max. Used Packet Buffers on a single PE : 0%
Avg. Used Attack Marker Nodes across all PEs : 0%
Max. Used Attack Marker Nodes on a single PE : 0%
Avg. Used Shell Marker Nodes across all PEs : 0%
Max. Used Shell Marker Nodes on a single PE : 0%
Avg. Used L7 Dcap flows across all PEs : 0%
Max. Used L7 Dcap flows on a single PE : 0%

Applicable to:

NS-series Sensors