Once the Bypass Switch has been connected to the network and the Sensor, check the switch's status LED to verify that the switch is receiving power from the power adaptors and check the port status and operating mode status in the Sensor interface to ensure that the port is enabled and in in-line fail-open active mode.
Status LED on the Bypass Switch
Item | Description |
|---|---|
1 | The Power LED indicates whether one or two power connections are detected by the unit. A solid green LED indicates that it is connected and a solid red LED indicates that nothing is connected. |
2 | The Inline LED located underneath the activity LEDs of the network ports indicates the state of the bypass segment. The LED is green in the inline mode and off when the switch is in the bypass mode. |
3 | The activity LEDs for the network ports are red when data is transferred and off when the network connection is lost. |
Port and Operation mode status
The port status and operating mode status for in-line fail-open mode are as follows.
LED | Port Color on the Sensor | Operation mode status |
|---|---|---|
Gigabit Ports Link | Green Off | The link is connected. The link is disconnected. |
Gigabit Ports Act | Amber Off | Data transferring. No data transferring. |