Verify the SNMP setup

These steps show you how you test the setup for its bypass capability and SNMP traps.

1. On a Windows PC, for example, open the iReasoning MIB browser.
2. Click File → Load MIBs.
   A pop-up window appears.
3. Locate the MIB file for the Active Fail-Open kit and click Open.
   The MIB is loaded.
4. Configure the parameters for SNMPv3 traps on the server.
5. Login to the web interface of the Active Fail-Open chassis.
6. Access the Bypass tab by following the steps shown in Enable tap/inline mode for the Active Fail-Open module to place the Active Fail-Open module into bypass condition and back to Inline.
7. snmp traps should be shown( bypass trap) in snmp trap server.

You will notice an SNMP trap appear in the list.