These steps show you how you test the setup for its bypass capability and SNMP traps.
On a Windows PC, for example, open the iReasoning MIB browser.
Click File → Load MIBs.
A pop-up window appears.
Locate the MIB file for the active fail-open kit and click Open.
The MIB is loaded.
Configure the parameters for SNMPv3 traps on the server.
Login to the web interface of the fail-open switch.
Access Bypass tab by following the steps shown in Enable tap mode for the fail-open switch to place the fail -open module into bypass condition and back to inline.
snmp traps should be shown( bypass trap) in snmp trap server.
You will notice an SNMP trap appear in the list.