The new docs.trellix.com features a modernized UI and AI-powered conversational search. Content is currently available in English, with additional languages expected in early November 2026. We hope you enjoy the updated experience.

Press CTRL+K to open search

Verify the SNMP setup

  • Published on Oct 5, 2026
  • 1 minute(s) read
Prev Next

These steps show you how you test the setup for its bypass capability and SNMP traps.

Task

  1. On a Windows PC, for example, open the iReasoning MIB browser.
  2. Click File → Load MIBs.
    A pop-up window appears.
  3. Locate the MIB file for the active fail-open kit and click Open.
    The MIB is loaded.
  4. Configure the parameters for SNMPv3 traps on the server.
  5. Login to the web interface of the fail-open switch.
  6. Access Bypass tab by following the steps shown in Enable tap mode for the fail-open switch to place the fail -open module into bypass condition and back to inline.
  7. snmp traps should be shown( bypass trap) in snmp trap server.

Results

You will notice an SNMP trap appear in the list.

Copyright © 2026 Musarubra US LLC | Privacy | Legal | AI Disclaimer