These steps show you how you test the setup for its bypass capability and SNMP traps.
On a Windows PC, for example, open the iReasoning MIB browser.
Click File → Load MIBs.
A pop-up window appears.
Locate the MIB file for the Active Fail-Open kit and click Open.
The MIB is loaded.
Configure the parameters for SNMPv3 traps on the server.
Login to the web interface of the Active Fail-Open chassis.
Access the Bypass tab by following the steps shown in Enable tap/inline mode for the Active Fail-Open module to place the Active Fail-Open module into bypass condition and back to Inline.
snmp traps should be shown( bypass trap) in snmp trap server.
You will notice an SNMP trap appear in the list.